|
| EF_wanabe |
|
||
|
Troyman wrote: I would be pulling the oval plug out of the floor of the wheel well to get that water out asap... me and mums bf argued he said same But i got no plug closest thing is a plate with a pop rivet in But i did use a 10L bucket to scope it out then chamois and microfibre's to dry and painted the bottom of the boot quickly I found one of my tail light gaskets where stuffed and the rear garnish has had a few leaks fixed via silicone , As the EA boot lid is different to EB/ED EB/ED garnish on EA boot= pain in the a** |
||
| Top | |
||
| EF_wanabe |
|
||
|
I figured out what i am getting next
An adjustable cam gear 
|
||
| Top | |
||
| TROYMAN |
|
||
|
there should be 2 rubber plugs in the spare wheel well.....
if your ea don't have it , I would be drilling a 10 mm hole at the lowest point.... but that's up to you |
||
| Top | |
||
| Stealth6 |
|
|||
|
EF_wanabe wrote: Does the XG ever flood in the back of the ute like that ever ? Nope, drains out under the tailgate Leaks in through the windscreen however, due to the fact that a rock came through it, windscreen was replaced, then when the new windscreen went in we left the windows up on a hot day and it literally exploded, third windscreen came along and ever since that its leaked in the bottom passenger corner 
_________________ Yep, I don't know what to write here... |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Troyman wrote: there should be 2 rubber plugs in the spare wheel well..... if your ea don't have it , I would be drilling a 10 mm hole at the lowest point.... but that's up to you Yea going to do that tomorrow 2 holes But i have fixed 90% of the leaks just need a closer look now. maybe even lock my self in boot and someone spray water haha |
||
| Top | |
||
| mitchell g |
|
||
|
|||
| Top | |
||
| EF_wanabe |
|
||
|
mitchell g wrote: HAHA kick in the rear seat's simple but sub in way and a kenwood digital series amp = i would commit suicide if i ruined it hmm so what are same value for money vernier cam gear's which are popular im looking at the crow cams one |
||
| Top | |
||
| Stealth6 |
|
|||
|
Rollmaster of Crow vernier gears seem to be the go (well its the only two i ever seem to read about on here). Rollmaster i think may be a bit cheaper but many have used them without a drama.
_________________ Yep, I don't know what to write here... |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Beaut XG wrote: Rollmaster of Crow vernier gears seem to be the go (well its the only two i ever seem to read about on here). Rollmaster i think may be a bit cheaper but many have used them without a drama. I might go the crow vernier gear what do you reckon Gosh $210 on ebay must be cheaper some where lol |
||
| Top | |
||
| Stealth6 |
|
|||
|
http://www.ebay.com.au/itm/ROLLMASTER-V ... faf&_uhb=1
heres the rollmaster one...
_________________ Yep, I don't know what to write here... |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Beaut XG wrote: http://www.ebay.com.au/itm/ROLLMASTER-VERNIER-ADJUSTABLE-TIMING-GEAR-FORD-6-EA-AU-CS3255-/181005828015?pt=AU_Car_Parts_Accessories&hash=item2a24c9bfaf&_uhb=1 heres the rollmaster one... Ok i am looking at the rollmaster and it seems as if it has a slit in the teeth is that what im seeing not like it matters can anyone comment on this here is the crow one does that also have the slit or is it like the stock gear but adjustable http://www.ebay.com.au/itm/CS6EA-V-Crow ... a4d&_uhb=1 |
||
| Top | |
||
| Stealth6 |
|
|||
|
where are you seeing this slit?
_________________ Yep, I don't know what to write here... |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Beaut XG wrote: where are you seeing this slit? or is it the camera angle on it as in a shadow ? or maybe it does have on as that is how it moves highly doubt it |
||
| Top | |
||
| Stealth6 |
|
|||
|
I'm not sure what the go is, Only thing i can see different is the rollmaster one is wrapped in plastic s**t, may be tricking you haha.
_________________ Yep, I don't know what to write here... |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Beaut XG wrote: I'm not sure what the go is, Only thing i can see different is the rollmaster one is wrapped in plastic s**t, may be tricking you haha. Might be i think i will get the rollmaster Guess there the same thing at the end of the day ? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
