|
itlookslikeaxr6 |
|
|||
|
Well cheers troy, Still plenty to do but i want to drive it and enjoy it for a while because iirc it was September when i pulled it apart.
But not much can go wrong swapping diff's and sway bars I HOPE Regards.
_________________
|
|||
Top | |
huggiebear |
|
|||
|
haha i broke mine 11 months ago and its still not running yet lol. tho in fairness i did have it running but on a dodgy motor i got ripped off on.
|
|||
Top | |
itlookslikeaxr6 |
|
|||
|
Didn't get it from SommersNL(Leticia) did ya!
Due to inexperience i was giving a plain EF engine with an AU head(the engine had not been put together correctly and was internally damaged. I was told it was a EL hybrid, i didn't really have a reason not to trust them but well there ya go. Glad i just wasn't to much out of pocket over it. cheers.
_________________
|
|||
Top | |
ToranaGuy |
|
|||
|
Nice to know we were right about the brakes blowing fuses, but it's better to know you have it running properly now!
You don't "have to" change the pulley on the alternator to fit the 110amp alternator into a EA-ED falcon. You probably should, but i didn't, and i have not damaged the belt after more than 30,000kms of driving. YMMV. I did have to modify the top alternator bracket, the top of the alternator housing/case & put a thread into the top bolt hole so it will bolt on & adjust as per factory specs. One day i might change the pulley, but there are too many other things to do first..... Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
Top | |
huggiebear |
|
|||
|
{USERNAME} wrote: Didn't get it from SommersNL(Leticia) did ya! Due to inexperience i was giving a plain EF engine with an AU head(the engine had not been put together correctly and was internally damaged. I was told it was a EL hybrid, i didn't really have a reason not to trust them but well there ya go. Glad i just wasn't to much out of pocket over it. cheers. haha she made me all these promises and never turned up, never picked up the phone for months, but during that time became a cruise mod.. WTF na i got mine through EL_Venom, from his uncle but all dealings were done through him, id never trust him, i thought he would be genuine since he was mates with my brother since school (10 years) but turns out he is just like leticia |
|||
Top | |
itlookslikeaxr6 |
|
|||
|
{USERNAME} wrote: Nice to know we were right about the brakes blowing fuses, but it's better to know you have it running properly now! You don't "have to" change the pulley on the alternator to fit the 110amp alternator into a EA-ED falcon. You probably should, but i didn't, and i have not damaged the belt after more than 30,000kms of driving. YMMV. I did have to modify the top alternator bracket, the top of the alternator housing/case & put a thread into the top bolt hole so it will bolt on & adjust as per factory specs. One day i might change the pulley, but there are too many other things to do first..... Cheers ToranaGuy Thanks for the comments guys, s**t i wish i checked here before fitting the ALT got it all fitted then realised the bracket issue and didn't want to screw around because its booked in for RWC tomorrow morning. So its just got a 70A 93DA Alt on it so its working, On another note i forgot to disconnect the battery after putting the window down and when i was sliding the alt in it touched the power cable and earth'ed out surprised me, and now the low beams don't work but everything else does. Ill look at it in morning but any one got idea's on what i should check first Cheers.
_________________
|
|||
Top | |
huggiebear |
|
|||
|
fuses and relays
|
|||
Top | |
itlookslikeaxr6 |
|
|||
|
Fuses under the dash are all good, i might duck out and swap the headlight relay with a spare that's got to be it
_________________
|
|||
Top | |
tony.martin11 |
|
||
|
so that nothing else happens before the RWC and all, DONT TOUCH THE CAR FOR GOD SAKES!
You never know what can happen
_________________ BANNED USER |
||
Top | |
itlookslikeaxr6 |
|
|||
|
Haha,
Yer the headlights are fine now just fiddled with the relays and they want to work, i got a glove box of fuses, relays and a few screws just random crap. Haha last time i left it over night it wouldn't start at all! But its got to be fine now not that im going to assume anything. Going to take it for a drive now thou.
_________________
|
|||
Top | |
tony.martin11 |
|
||
|
have fun
_________________ BANNED USER |
||
Top | |
itlookslikeaxr6 |
|
|||
|
Hmm well its all working.
But.. In reverse its knocking on something gearbox wise. and there's a rattle coming from what i think is the exhaust and its pretty annoying. It pulls hard but I think the clutch is slipping under power as the tyres didn't chirp but the rev's shot up and nearly hit the limiter. I managed to find a god dam 3mm Allen and tighten the b itch of a shifter as the thing wobbled off after a few shifts! I've got a leak on the top radiator hose where the Craig D thermo temp sensor goes in because i managed to loose the rubber... bung type thing. Might buy a new kit take it out and return the rest unless i can make something up. Really have to get use to this Clutch as the suzuki's is straight off the floor and real light. Could the clutch be a goner even thou the pedal is still rock hard, im thinking yes.
_________________
|
|||
Top | |
tony.martin11 |
|
||
|
thats good for rwc, nothing wrong at all...
_________________ BANNED USER |
||
Top | |
BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
my thermatic switch didnt come with the rubber thingy and troyman recommended black hi temp selastic to me and make sure it's black as my silastic is grey and stands out shockingly but it works
cheers bear |
|||
Top | |
itlookslikeaxr6 |
|
|||
|
The black silicone i used doesn't seem to harden and was just pushed out by the coolant.
Regards.
_________________
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 28 guests |