|
| mitchell g |
|
||
|
baught one of these the other day,
{DESCRIPTION} just showing the diffrence {DESCRIPTION} {DESCRIPTION} and now where it sits in the car, {DESCRIPTION} feels great, about 4 inchs of travel between 1st to 2nd, so i can have my fingers open and pull it though into the palm of my hand and be in 2nd gear, |
||
| Top | |
||
| mitchell g |
|
||
|
|
||
| Top | |
||
| TROYMAN |
|
||
|
not sounding to good...
|
||
| Top | |
||
| mitchell g |
|
||
|
internal timing, i tried re loading the tune incase it'd f**k, but itd up and it gave a ripper of a backfire, it had a massive cloud of black smoke out the back and almost equal comming out the throtle body
|
||
| Top | |
||
| bry40l |
|
|||
|
Cam timing? How the fuq did you do that.
_________________ BF XR6 |
|||
| Top | |
|||
| mitchell g |
|
||
|
apprently ba's had a common fault of the tentions f**k up and losing tention, so i've ripped the tappent cover off and the chains got abbut the about 4mm of movement but none of the valves seem to be depressed as if they're bent
|
||
| Top | |
||
| bry40l |
|
|||
|
{USERNAME} wrote: apprently ba's had a common fault of the tentions f**k up and losing tention, so i've ripped the tappent cover off and the chains got abbut the about 4mm of movement but none of the valves seem to be depressed as if they're bent Your experienced at bending valves aren't ya.
_________________ BF XR6 |
|||
| Top | |
|||
| mitchell g |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: apprently ba's had a common fault of the tentions f**k up and losing tention, so i've ripped the tappent cover off and the chains got abbut the about 4mm of movement but none of the valves seem to be depressed as if they're bent Your experienced at bending valves aren't ya. sure am, i'll try run a comp test tomorrow and see what we find out |
||
| Top | |
||
| TRY THIS |
|
||
|
Bent valves again? Go see msp and see if he can get you turbo valves they are much stronger And let's see you bend them buggers
_________________ growler and hid lights in fog and low beam dual 2.5" exhaust |
||
| Top | |
||
| bry40l |
|
|||
|
{USERNAME} wrote: Bent valves again? Go see msp and see if he can get you turbo valves they are much stronger And let's see you bend them buggers .......if the piston and valves meet. They will always bend. ...pistons traveling pretty quick. Also if you read correctly hes not sure whats f**k yet but the cam chains loose.....
_________________ BF XR6 |
|||
| Top | |
|||
| mitchell g |
|
||
|
{USERNAME} wrote: Bent valves again? Go see msp and see if he can get you turbo valves they are much stronger And let's see you bend them buggers if the vavles are bent this thing will become the wreckers special |
||
| Top | |
||
| TRY THIS |
|
||
|
I did read it cause he's asked me to take him to go get the comp tester but that's what he did with his last motor was the timing chain slipped and bent his valves so I was just guessing somthing simmaler has occurred
_________________ growler and hid lights in fog and low beam dual 2.5" exhaust |
||
| Top | |
||
| mitchell g |
|
||
|
bry was just saying how valve will be no matter what, ss this bent his when his timming was wrong with his cams
|
||
| Top | |
||
| TRY THIS |
|
||
|
Oh I'm not getting mad was just saying what I thought might be an option
_________________ growler and hid lights in fog and low beam dual 2.5" exhaust |
||
| Top | |
||
| mitchell g |
|
||
|
{USERNAME} wrote: Oh I'm not getting mad was just saying what I thought might be an option i'm just explaining before we end up with a massive s**t storm, don't need you to wanting to hug each other with knives |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
