|
TRY THIS |
|
||
|
Prepare
You do not have the required permissions to view the files attached to this post.
_________________ growler and hid lights in fog and low beam dual 2.5" exhaust |
||
Top | |
mitchell g |
|
||
|
Attachment: untitled.png
You do not have the required permissions to view the files attached to this post. |
||
Top | |
bry40l |
|
|||
|
Time for cams and springs I say.
_________________ BF XR6 |
|||
Top | |
mitchell g |
|
||
|
Snapped cam
|
||
Top | |
TROYMAN |
|
||
|
They dont make them like they use to...
|
||
Top | |
mitchell g |
|
||
|
I havent even been thrashing it much in the last month
|
||
Top | |
Stealth6 |
|
|||
|
Get some bloody superglue and put it back together.
_________________ Yep, I don't know what to write here... |
|||
Top | |
mitchell g |
|
||
|
|
||
Top | |
SWC |
|
||
|
Now you will have meatal through the motor.
I would strongly suggest dropping the sump and checking the oil pump as well as flushing the full system and checking the bottom end etc. |
||
Top | |
mitchell g |
|
||
|
{USERNAME} wrote: Now you will have meatal through the motor. I would strongly suggest dropping the sump and checking the oil pump as well as flushing the full system and checking the bottom end etc. i was going to drop the engine oil anyway, so i might run an engine flush threw it, in all honesty if i were to pull this out and fix the motor up, gettin the oil pump out and cleaning it up and all that i'd be about the same as getting another $450 motor from the wreckers and dropping that in there |
||
Top | |
SWC |
|
||
|
If you use an oil flush, all you will do is circulate any metal that is retained in the sump and already in the oil pump.
If this is the way that you want to go, then drop the oil and pour 4 litres or more of kero over the head/rocker gear and let it drain out, 8lts would be better. Pull the oil filter, drop on a cheapy and put some cheap oil in it, run for 10 mins or so then drop it out. Change filter again and fill with good oil. You may get away with this if you are lucky. |
||
Top | |
mitchell g |
|
||
|
i'll give it ago, cheers
|
||
Top | |
TROYMAN |
|
||
|
I would bin the engine and go for a low km wrecker special..
|
||
Top | |
mitchell g |
|
||
|
{USERNAME} wrote: I would bin the engine and go for a low km wrecker special.. 100 bucks to get a new set of cams, so i'll see even if this motor old last me an extra 2 months thats enough for me to consider my plans, if i was closer to my opens licence i'd get the 20 grand atomic motor |
||
Top | |
mitchell g |
|
||
|
todays discoveries involved
trythis left my key on and made my battery go flat cam sharfts are hollow cam cages had losened off so the cam would have been rolling over the roller and lifting off and then this would have caused flex in the cam eventurly leading to it snapping as it's done |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 30 guests |