|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
I've run HiTech headers in 2 cars. Pacemakers in the other. No difference between brands. Any decent looking extractors is going to be better than the horrible cast manifold.
So your fairlane is a NA11? It won't have 2.77 gears UNLESS someone put them there. 2.77 disappeared when they p****d off the 3 speed auto
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Lowlane7 |
|
||
|
{USERNAME} wrote: I've run HiTech headers in 2 cars. Pacemakers in the other. No difference between brands. Any decent looking extractors is going to be better than the horrible cast manifold. So your fairlane is a NA11? It won't have 2.77 gears UNLESS someone put them there. 2.77 disappeared when they p****d off the 3 speed auto That's a good point about the diff ratios.. You probably have a 3.23 for the 4 spd..
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Darcy4524 |
|
||
|
oh okay i thought they still used 2.77 is there anyway to check?
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Lowlane7 |
|
||
|
There are 2 different metal tabs bolted to the back face.
One held by the filler plug usually has LSD tag. Another smaller one held by a cover plate bolt has a part number and should have a ratio on that. Do you know how to work it out with marks and spinning the wheel?
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Darcy4524 |
|
||
|
no i dont know how to but ill look at the plate and let you know what it says.
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Darcy4524 |
|
||
|
couldnt read it so i did the old paper and pencil trick and it says 3.23
i also think it has a lsd but i thought the 3.23 didnt get an lsd. can anyone tell me some info on this? the reason i know it has a lsd is theres this one corner that i come round and every now and again i plant it and the left wheel spins then it locks up and stops spinning. i could be wrong but i dont know i just think it has a lsd. also how do i check if i have abs brakes i did a road test by going to 60km/h then slam on the brakes i stop with in 10 meters without a single skid but i cant find anything that says i have abs. any help is great as im still learning about it and it didnt come with a owners manual. it came from jackson ford so do you think they might have it on record or something? im also no longer getting the amp i wanted as i am going to get a new 2.25" 200 cell cat to replace my old one as a well running car is better than a well sounding sound system. which cat would be better a 2.25" 200 cell stainless steel magna flow, 2.25" 200 cell stainless steel venom cat or a 2.25" 100 cell stainless steel venom cat? there isnt much difference in price the magnaflow is $125 and the venom is $170
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Lowlane7 |
|
||
|
All the fairlanes and LTDs had an LSD AFAIK..
It should have ABS on the rear garnish. Or have a look in front of the LH front wheel if there is a bit bulky unit under there the brake lines go into that's the ABS unit. OR trace the brake lines from the master across the firewall.. If there is a line they goes directly down and out to the drivers wheel there is NO ABS... Another way to pick it. an AVS equipped car should only have 2 lines out of the master cylinder.. Want ABS? Gotta do crunches... Lol.
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Darcy4524 |
|
||
|
ill check if it has 2 lines in abit to hot to go outside and im already burnt. what about the catalytic converter?
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Darcy4524 |
|
||
|
i checked and it has 3 lines coming from the brake master cylinder
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
you don't have ABS. It didn't come out til NC Fairlane.
May not be a LSD. easiest way to check is jack up the rear and spin a wheel while the trans is in neutral. if both wheels spin the same way, it's a LSD. if they spin opposite ways to each other, it's not an LSD. And if you're going extractors get a set with a 2.5" collector. and get a 2.5" cat. don't bother with 2.25"
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Darcy4524 |
|
||
|
yeah im looking at 2.5 inch extractors but what about the cat why 2.5 and not 2.25 because it will just be bottle necked down to 2.25
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Lowlane7 |
|
||
|
Yeah good point SVO..
Plus all had the ABS badge.. But 3 lines is Non... 2 for front 1 to the rear.. Just try keep all diameters even with the exhaust. Extractors to a 2.5" flange. 2.5 cat. 2.5 exhaust. Or if you want a 2.25 system then adjust to that..
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Darcy4524 |
|
||
|
I want to keep the 2.25" exhaust so should i go 2.5" extractors, 2.25" cat and exhaust or should i go with 2.5" extractors and cat?
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Lowlane7 |
|
||
|
If you want 2.25, then just go all the way with it.
Extractors with 2.25 flange 2.25 cat 2.25 pipe. Any particular reason you like 2.25? Just asking..
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Darcy4524 |
|
||
|
Don't have the money to replace it all and i like how quiet it is. Also i havent seen or can find 2.25" extractors.
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 69 guests |
