|
| XR-Lane |
|
|||
|
comming along well mate.
is the dumper pipe just for sound or do you get more power out of it? did you cut the end of the muffler off to bold the dumper pipe on then weld the end back on the muffler, it just looks that way in the pic? why do you need cat bolts for your cam? 8.8's are plenty strong, the 10.9's they put them on catapillers because they go through a lot more strenous work than your standerd car. not that it matters being a mechanic you prolly got them cheap through work. |
|||
| Top | |
|||
| cjh |
|
|||
|
{USERNAME} wrote: comming along well mate.
is the dumper pipe just for sound or do you get more power out of it? did you cut the end of the muffler off to bold the dumper pipe on then weld the end back on the muffler, it just looks that way in the pic? why do you need cat bolts for your cam? 8.8's are plenty strong, the 10.9's they put them on catapillers because they go through a lot more strenous work than your standerd car. not that it matters being a mechanic you prolly got them cheap through work. I have seen the heads come off the cam bolts before, so, brand new bolt for me. The dumper is more for sound, and the dumper is bolted on, as in flange to flange, so if need be, I can still put the tailpipe on, everything that appears to be butchered, isn't, it can be returned to standard.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Dumpsta |
|
|||
|
Mate, any exterior shots? Was reading through this then saw that your from Rocky, good to see theres someone else with an E-series around here.. definitly not enough getting around.
|
|||
| Top | |
|||
| cjh |
|
|||
|
{USERNAME} wrote: Mate, any exterior shots? Was reading through this then saw that your from Rocky, good to see theres someone else with an E-series around here.. definitly not enough getting around.
What do mean there's not enough E series getting around???? Theres heaps of them......LOL I haven't got there yet, taking outside shots. The car needs a cut & polish, has heaps of overspray on it......CAT Yellow to be precise......LOL.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Dumpsta |
|
|||
|
Ok sorry, theres loads of E-series getting around.. I mean theres not enough modified ones getting around.
|
|||
| Top | |
|||
| locknut |
|
|||
|
What was the cost of the port and polish on the EA head? Am guessing you removed and fitted the head yourself, and just took it to a workshop.
Did you do this before or after cam? What cam do you have in it? |
|||
| Top | |
|||
| XR-Lane |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: comming along well mate. is the dumper pipe just for sound or do you get more power out of it? did you cut the end of the muffler off to bold the dumper pipe on then weld the end back on the muffler, it just looks that way in the pic? why do you need cat bolts for your cam? 8.8's are plenty strong, the 10.9's they put them on catapillers because they go through a lot more strenous work than your standerd car. not that it matters being a mechanic you prolly got them cheap through work. I have seen the heads come off the cam bolts before, so, brand new bolt for me. The dumper is more for sound, and the dumper is bolted on, as in flange to flange, so if need be, I can still put the tailpipe on, everything that appears to be butchered, isn't, it can be returned to standard. Fair enough about you seeing them ripeed of before mate, the car in question must have been given quite a bit i can onley amagine lol. re: a sound file of your dumper pipe, most mobile phones have a sound recorder these days if yours does you shud be able to transfer it to your computer and add it to a post the sam way you add a pic Josh |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
i really like the dumper pipe idea, but not sure on having the exhaust fumes exit from the middle of the car?
|
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: What was the cost of the port and polish on the EA head? Am guessing you removed and fitted the head yourself, and just took it to a workshop.
Did you do this before or after cam? What cam do you have in it? I did the head myself, port & polish & fitting the head. The cam is an EA 3.9 std unit, but I have fitted the rocker gear off the ED 4.0 on it. This is the reason i'm using an EA cam: Inlet..........opens _ BTC................................17dgs closes _ ABC................................63dgs Exhaust opens _ BBC................................65dgs closes _ ATC................................11dgs 4.0 std cam Inlet..........opens _ BTC................................16dgs closes _ ABC................................56dgs Exhaust opens _ BBC................................62dgs closes _ ATC................................14dgs They have the same lift.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
{USERNAME} wrote: Ok sorry, theres loads of E-series getting around.. I mean theres not enough modified ones getting around.
Some might be modded, but I don't know. I don't get out much, too busy...LOL.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
{USERNAME} wrote: i really like the dumper pipe idea, but not sure on having the exhaust fumes exit from the middle of the car?
As long as the boot seal is in good order, and the grommets are still in the spare tyre well, and things like that, not a problem.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
Here is a pict of the car.
You do not have the required permissions to view the files attached to this post.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
I've had a go at puting a vid on Youtube, gotta wait and see if it works!!!
Ok...its under the heading of " IMGP0696 EA on Dyno run". It was still being processed at the time.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
OK, its done...see the vid on the EA dyno run. I finally figured it out..LOL
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||
|
The address or link for the dyno run of the ol EA is... http://au.youtube.com/watch?v=0fJ8w_elBN0 ..... it should work, I hope.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 66 guests |
