Fordmods Logo

Project EA ( Barra DOHC Conversion ) 

 

Page 16 of 17 [ 248 posts ] Go to page Previous  1 ... 13, 14, 15, 16, 17  Next

 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 20, 2016 10:37 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

i wished i lived in vic right now hahaha. the best i could do was getting most of a ba for $1500 at the wreckers :? well i guess thats sydney for you ay. i might look around abit more, see if i can get sumthing abit cheaper. RANDOM NOOB question, to start a engine out side the car dose it have to be mounted realy good to sumthing, or could i get a wooden platform bolt sum brakets to that and the engine mount holes and be good to go?
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 6:17 am 
Fordmods Junkie
Online
User avatar

Posts: 3972

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

{USERNAME} wrote:
RANDOM NOOB question, to start a engine out side the car dose it have to be mounted realy good to sumthing, or could i get a wooden platform bolt sum brakets to that and the engine mount holes and be good to go?



pretty sure motor would need to be as ya wouldn't want it to fall over lol
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 6:20 am 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

{USERNAME} wrote:
i wished i lived in vic right now hahaha. the best i could do was getting most of a ba for $1500 at the wreckers :? well i guess thats sydney for you ay. i might look around abit more, see if i can get sumthing abit cheaper. RANDOM NOOB question, to start a engine out side the car dose it have to be mounted realy good to sumthing, or could i get a wooden platform bolt sum brakets to that and the engine mount holes and be good to go?


Maybe it would be better to start you own thread for asking questions on this instead of hijacking someones Garage thread. which is supposed to be about the build for their car.

If you have you own thread, all the information will be in one place.

Last edited by SWC on Thu Jan 21, 2016 1:51 pm, edited 1 time in total.

Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 1:35 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

haha thats funny.. Hijackings sumones thread.? how am i doing that mate? by asking a few questions about a topic that a couple of people have obviously completed on this forum. I thort thats what the forums were for? could be wrong hahaha funny, the epic comments people come up with.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 1:56 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

{USERNAME} wrote:
haha thats funny.. Hijackings sumones thread.? how am i doing that mate? by asking a few questions about a topic that a couple of people have obviously completed on this forum. I thort thats what the forums were for? could be wrong hahaha funny, the epic comments people come up with.


Wasn't meant to funny.

The Garage threads are set up by the owners of their cars to put up things that they are doing with their cars.

Understand that you are trying to aquire knowlege and information corncerning your own thoughts for your build. Just stating that it may be better for you to put up your own thread.

Show your car as it is now and the work that you want to do or are doing.

Have you actually decided which way you want to go. You have posted about the DOHC Barra, then 5.0 Windsor, then SOHC AU engine, now it appears that you are back to the Barra.

I have answered a number of your questions in a number of threads concerning these things so what I posted about starting your own thread was advice.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 2:12 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

omg dude. your last to messages havent even been about cars. why would i make a mess of the forums for. I dont think people want to come in here and see 50 titles of barra converions into e series falcons, so i am keeping all the info in one place. But ye im not here to debait with you. Im here to talk to people that know about this conversion. to top it off mate i was asked to come into this thread and talk to the guys about it. It is funny coz im here talking about this topics converion, your here talking crap about people. Funny. But enyway have a good day mate.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 2:15 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

{USERNAME} wrote:
omg dude. your last to messages havent even been about cars. why would i make a mess of the forums for. I dont think people want to come in here and see 50 titles of barra converions into e series falcons, so i am keeping all the info in one place. But ye im not here to debait with you. Im here to talk to people that know about this conversion. to top it off mate i was asked to come into this thread and talk to the guys about it. It is funny coz im here talking about this topics converion, your here talking crap about people. Funny. But enyway have a good day mate.


No where have I talked crap about people.

The advice was to start your own thread but you appear to know it all so go for it.

Had my say, take it or leave it, up to you.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 3:21 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

look mate, i would rather not get off on the wrong foot with you. forums are for info. Im not trying to hijack enyones enything. And no i dont know eveything mate, thats why im here asking people that do know. Im sure you would do the same? After all info is the key befor starting any big project. Sorry for what ever i did to make you think i was trying to jump in on g.falcons thread mate. I will make my own thread on what i do. I just need to figure out what im going to do, and get sum stuff to work on. which want be for another couple of week, at least.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Thu Jan 21, 2016 3:38 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

All is good.

Understand your need to gather as much information as you can and this site can yield a wealth of information (some good, some not so good :D ). Ask all the questions you like, I am sure you will get the answers you are looking for.

Look forward to seeing your build thread.

Good idea to work out which way you want to go. I can be a very expense exersize ti change direction mid build. Been there, done that :D .

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Tue Jan 26, 2016 9:56 pm 
Stock as a Rock
Offline

Age: 37

Posts: 129

Joined: 19th Jan 2016

Ride: G6e

Location: Adelaide
SA, Australia

{USERNAME} wrote:
All is good.

Understand your need to gather as much information as you can and this site can yield a wealth of information (some good, some not so good :D ). Ask all the questions you like, I am sure you will get the answers you are looking for.

Look forward to seeing your build thread.

Good idea to work out which way you want to go. I can be a very expense exersize ti change direction mid build. Been there, done that :D .

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Tue Jan 26, 2016 9:57 pm 
Stock as a Rock
Offline

Age: 37

Posts: 129

Joined: 19th Jan 2016

Ride: G6e

Location: Adelaide
SA, Australia

{USERNAME} wrote:
All is good.

Understand your need to gather as much information as you can and this site can yield a wealth of information (some good, some not so good :D ). Ask all the questions you like, I am sure you will get the answers you are looking for.

Look forward to seeing your build thread.

Good idea to work out which way you want to go. I can be a very expense exersize ti change direction mid build. Been there, done that :D .

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Tue Jan 26, 2016 9:57 pm 
Stock as a Rock
Offline

Age: 37

Posts: 129

Joined: 19th Jan 2016

Ride: G6e

Location: Adelaide
SA, Australia

{USERNAME} wrote:
All is good.

Understand your need to gather as much information as you can and this site can yield a wealth of information (some good, some not so good :D ). Ask all the questions you like, I am sure you will get the answers you are looking for.

Look forward to seeing your build thread.

Good idea to work out which way you want to go. I can be a very expense exersize ti change direction mid build. Been there, done that :D .

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 27, 2016 6:18 am 
Fordmods Junkie
Online
User avatar

Posts: 3972

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

{USERNAME} wrote:
{USERNAME} wrote:
All is good.

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc



depends. just have to keep an eye out. he got he's for $400 [which is blooody amazing & perfect] where as mine was rough ie no rear brakes [removed] & damaged front panels for $300 [drives ok]. all depends so keep an eye open
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 27, 2016 2:09 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 880

Joined: 16th May 2012

Gallery: 16 images

Ride: EF-XR6/XG-6/XE-V8- project

{USERNAME} wrote:
{USERNAME} wrote:
{USERNAME} wrote:
All is good.

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc



depends. just have to keep an eye out. he got he's for $400 [which is blooody amazing & perfect] where as mine was rough ie no rear brakes [removed] & damaged front panels for $300 [drives ok]. all depends so keep an eye open


You can get lucky-I paid $500 for mine (smashed in front) so some gear was damaged bad,check out Greys Online seen lots of BA's go under a grand,Johnny.

 

_________________

XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter

https://youtube.com/channel/UCaRUQ10of3FlOuSpvfapOtA

Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 27, 2016 6:02 pm 
Stock as a Rock
Offline

Age: 37

Posts: 129

Joined: 19th Jan 2016

Ride: G6e

Location: Adelaide
SA, Australia

{USERNAME} wrote:
{USERNAME} wrote:
{USERNAME} wrote:
{USERNAME} wrote:
All is good.

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc



depends. just have to keep an eye out. he got he's for $400 [which is blooody amazing & perfect] where as mine was rough ie no rear brakes [removed] & damaged front panels for $300 [drives ok]. all depends so keep an eye open


You can get lucky-I paid $500 for mine (smashed in front) so some gear was damaged bad,check out Greys Online seen lots of BA's go under a grand,Johnny.


I always thought its pickles the go to place but takes a look at this site thank you
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 16 of 17  [ 248 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17  Next

Who is online

Users browsing this forum: No registered users and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 22, 2024 4:23 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names