|
| TROYMAN |
|
||
|
{USERNAME} wrote: He only bought a Gear Knob, not a complete shifter. The billet shifter that he got from the states is the actual shifter mechanism. BenJ yes that would be correct.. {USERNAME} wrote: Yer i know, but he still paid as much for the knob* as he did for the shifter is what im getting at. yes i know the knob was as much as the shift.. but the reason i got the shift from usa was because to buy a billet one locally was around $450.. but thats the same as i brought a supercharger kit thats nearly 3 times the value of the car.. or 5 times the price i paid for the car...  ..car modding is  ,,, plus its xmas it gives me an excuse to spend more money to do more mods..lol.. lets see ?? whats next??? ummm hmmmm i think some hd sway bars are in order.. |
||
| Top | |
||
| TROYMAN |
|
||
|
well today i picked up a pair of hd sway bars from benj.
 a pedders for the front and a kmac for the rear.. removed the std rubbish,added some new bushes and its all fitted.. pics.. pedders front.. Attachment: DSC01661.JPG front fitted.. Attachment: DSC01662.JPG kmac rear.. Attachment: DSC01663.JPG rear fitted Attachment: DSC01665.JPG
You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| huggiebear |
|
|||
|
how much were the sway bar bushes?
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
the urathane d bushes were $22 for a pair.. and the link pin rubbers i had already replaced previously..
from memory they were about $25 for the set.. |
||
| Top | |
||
| huggiebear |
|
|||
|
awesome cheers. i might see if convetry's has any in stock tomorrow while i swap my steering racks over
|
|||
| Top | |
|||
| 4LEDboy |
|
|||
|
{USERNAME} wrote: 1. BA motor from wrecker - $750 2. BA wiring loom and cpu - $250 3. Fitting of motor and wiring of new loom - $1500+ 4. Tuning - $400 5. New intake pipes - $400 Total around $3300+ This doesnt include a BA transmission if its required or not, I dont know. So you could add another $750+ for a 4 speed BA tranny if the motor doesnt match up with the AU trans. (estimated power unintercooled between 220-250rwkw?) . You can pick up a standard BA motor from adelaide ford wreckers for $300 
_________________ {DESCRIPTION} < Click on it! You know you want too! Quote: Thats not the point *a**hole
|
|||
| Top | |
|||
| shav |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: 1. BA motor from wrecker - $750 2. BA wiring loom and cpu - $250 3. Fitting of motor and wiring of new loom - $1500+ 4. Tuning - $400 5. New intake pipes - $400 Total around $3300+ This doesnt include a BA transmission if its required or not, I dont know. So you could add another $750+ for a 4 speed BA tranny if the motor doesnt match up with the AU trans. (estimated power unintercooled between 220-250rwkw?) . You can pick up a standard BA motor from adelaide ford wreckers for $300 Well thats good. IF you lived in Adelaide.
_________________ Cheers |
|||
| Top | |
|||
| TROYMAN |
|
||
|
well after driving the car with the hd sway bars (thanks benj) there is a noticable difference in the stability of the car, cornering is even more fun... especially sidways..the car already handled good but there was still a bit of body roll..
so now there is also no more wishy washy/body dive type feeling when you get it sideways..lol (if thats any sence)..
|
||
| Top | |
||
| shav |
|
|||
|
I know what you mean Troy. I have whiteline hd sways front and rear on my car and noticed that going into corners at speed, you can pull out of corners real quick and stable without the inside rear wheel wanting to break traction.
_________________ Cheers |
|||
| Top | |
|||
| WARMACHINE |
|
||
|
A tighter packed limited slip centre will act the same coming out of corners, troyman my car handles like a boat i was thinking of getting the h/d front sway bar what do you recon mate is she a goer?
|
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: A tighter packed limited slip centre will act the same coming out of corners, troyman my car handles like a boat i was thinking of getting the h/d front sway bar what do you recon mate is she a goer? yep definatly a nice improvement.. even though i have koni shocks,king springs already it still needed the hd sway bars to help try keep it level in the corners.. 
|
||
| Top | |
||
| WARMACHINE |
|
||
|
Do you know how thick it is mate? i only have std eb turds on.
|
||
| Top | |
||
| TROYMAN |
|
||
|
the front one is a pedders27mm.. (you can also get a fat 30mm aswell.).
and my rear is a 25mm k mac... i brought them both secondhand... |
||
| Top | |
||
| WARMACHINE |
|
||
|
Thanks mate.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
Well done on fitting the Swaybars Troy.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
