|
| ranio |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: any motor from the 4.0 range. the AU motor is the most popular choice. all thats needed is the fins on the front ground flat to clear the k-frame. you can also go the 5.0 but this requires a loom swap and a k-frame swap i also have to apologize to mick (NCIILANE) i tried to find pics of your car but slipped my mind before i submitted it. I have a spare 5.0L Loom and K-frame if interested   Can't help with the motor though unless you are willing to rebuild it........otherwise it's future involves holding up glass, coffee and Ford magazines  Not to worry Huggie, I knew it wouldn't have been deliberate  We share the same addiction!But seeing as though you were struggling to find pic's of mine, let me help out  With stockies!  on the prowlers  and the chrome look  BAH! I just cant get over how old school sexy that is! |
||
| Top | |
||
| huggiebear |
|
|||
|
{USERNAME} wrote: [Can't help with the motor though unless you are willing to rebuild it........otherwise it's future involves holding up glass, coffee and Ford magazines mick mick mick... send it my way. my DC needs a motor (currently motor and boxless) you dont want to see a once V8 DC LTD be converted to I6 do you  it WILL make baby jesus cry
|
|||
| Top | |
|||
| upperkuts |
|
|||
|
AU motor will be the go I think, just gotta start looking for one now
And I would love to get those rims but your right NCIILANE, that's a long way to go for a set of rims.. Went to the wreckers today to have a look at the LTD grille they told me they had... but turns out it was off an older LTD. they had the chrome wheel arch moulds too but they were also off an older model, and one was damaged. Back to searching again.. or does anyone on here know where there's one laying around??
_________________ SIGNATURE REMOVED, signature pics must not exceed 120x500 pixles |
|||
| Top | |
|||
| huggiebear |
|
|||
|
mick posted a site a few months back to a company that sells them new. about 300 bucks i think.
i have 2 types. 1 aftermarket the same as that site, i also have some factory ford ones as fitted to my DA as it left ford and started its life as a limo |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
Ah look, another LWB! Slowly but surely we are taking over this forum....
Your Lane pulls those stockies off alright, but a set of 20's would look classy! |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Welcome aboard - good to see another Fairlane convert, but I warn you they can be addictive!
and as far as rims go I've been drooling over these for my ZD but they'd be just as nice on a N series!http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT
_________________
|
|||
| Top | |
|||
| NCIILANE |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: [Can't help with the motor though unless you are willing to rebuild it........otherwise it's future involves holding up glass, coffee and Ford magazines mick mick mick... send it my way. my DC needs a motor (currently motor and boxless) you dont want to see a once V8 DC LTD be converted to I6 do you it WILL make baby jesus cryIf you can figure out a way to get the DC motor and box interstate, it's all yours......FREE! Beware though, it will be missing the injector loom and a few other bit's'n'pieces! To help with moving them, I'll even leave them connected to the rolling shell
_________________
|
|||
| Top | |
|||
| NCIILANE |
|
|||
|
{USERNAME} wrote: AU motor will be the go I think, just gotta start looking for one now And I would love to get those rims but your right NCIILANE, that's a long way to go for a set of rims.. Went to the wreckers today to have a look at the LTD grille they told me they had... but turns out it was off an older LTD. they had the chrome wheel arch moulds too but they were also off an older model, and one was damaged. Back to searching again.. or does anyone on here know where there's one laying around?? I have a complete DC LTD bonnet here that I just pulled from the tank, complete with grille, chrome strip and bonnet emblem! And if your patient, I may be able to deliver for free. I travel to Tamworth quite often
_________________
|
|||
| Top | |
|||
| NCIILANE |
|
|||
|
{USERNAME} wrote: Welcome aboard - good to see another Fairlane convert, but I warn you they can be addictive! and as far as rims go I've been drooling over these for my ZD but they'd be just as nice on a N series!http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT I just cracked a little woody! Old school style deep dish chrome.....mmmmmmmmmm!
_________________
|
|||
| Top | |
|||
| huggiebear |
|
|||
|
i might take you up on that offer
would really help me out. ill see what i can work out. surely a truck will still only be about 3-600 mark. also since everyone else is doing it. if you have a few spare hours have a browse through my thread. i just done an update. but be warned, nothing on my NC is stock. well apart from main body and k-frame lol the-garage-f53/huggiebear-s-nc-ii-fairlane-ghia-going-turbo-t50380.html |
|||
| Top | |
|||
| NCIILANE |
|
|||
|
{USERNAME} wrote: mick posted a site a few months back to a company that sells them new. about 300 bucks i think. i have 2 types. 1 aftermarket the same as that site, i also have some factory ford ones as fitted to my DA as it left ford and started its life as a limo Bit more than half that Huggie.....$175 a set! Here is the link to purchase the wheel arch moulds http://www.carshine.com.au/shop/catalog ... Path=38_40 Cheers, Mick
_________________
|
|||
| Top | |
|||
| upperkuts |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: AU motor will be the go I think, just gotta start looking for one now And I would love to get those rims but your right NCIILANE, that's a long way to go for a set of rims.. Went to the wreckers today to have a look at the LTD grille they told me they had... but turns out it was off an older LTD. they had the chrome wheel arch moulds too but they were also off an older model, and one was damaged. Back to searching again.. or does anyone on here know where there's one laying around?? I have a complete DC LTD bonnet here that I just pulled from the tank, complete with grille, chrome strip and bonnet emblem! And if your patient, I may be able to deliver for free. I travel to Tamworth quite often Mate, I'm keen as on this, let me know when your heading here and how much you want for it I wouldn't worry too much about the bonnet though just the grille is what I'm after. What brings you to Tamworth quite often? Not much happens here
_________________ SIGNATURE REMOVED, signature pics must not exceed 120x500 pixles |
|||
| Top | |
|||
| upperkuts |
|
|||
|
Some future plans for the Fairlane done in photoshop... I gotta get one of those grilles
You do not have the required permissions to view the files attached to this post.
_________________ SIGNATURE REMOVED, signature pics must not exceed 120x500 pixles |
|||
| Top | |
|||
| huggiebear |
|
|||
|
all 3 of mine have those grills. they are great looking with or without the chrome bonnet strip
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Gotta get a wheel alignment too!
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 42 guests |
