|
| SWC |
|
||
|
barraea wrote: SWC wrote: Drop the mounts by the 10mm. This was done on Benj's car and was no issues and his driveway was not good. Almost 4 wheel drive territory  .Ahhh yes i forgot all about the 10mm lower with the mounts which is quite easy But the k frame mod i am um certain if its a must i have read about someone just grinding a fun of the sump and getting away with it does this sound true though? Grinding the fins works for the AU Engine into the EA/EB/ED. Even then it is very close and sometimes needs gentle persuasion of the Cross Bar to fit safely. It won't work with the BA Sump. Here are a couple of pics from Benj's build. You can see how close the sump can sit to the cross bar on the front of the K Frame. You can also see how far forward the bar has been moved compared to a stock K Frame. Attachment: BADOHCInstall15.jpg Even if you ground the fins, the sump would still hit on the cross bar if not moved forward. Attachment: BADOHCInstall14.jpg You can see here how far forward the cross bar is from stock. Stock K Frame Attachment: BADOHC EB K Frame.jpg Modded K Frame. Attachment: BADOHC Modded KFrame.jpg Attachment: BADOHC Modded KFrame 2.jpg
You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| barraea |
|
||
|
Ahhh $20 of metal tube and a after noon shall fix it no big deal hey?
|
||
| Top | |
||
| SWC |
|
||
|
barraea wrote: Ahhh $20 of metal tube and a after noon shall fix it no big deal hey? As long as you know how to weld properly, yes. If you don't get a tradesman to do it. You don't want it cracking. Not something for the average DIY'er. |
||
| Top | |
||
| barraea |
|
||
|
SWC wrote: barraea wrote: Ahhh $20 of metal tube and a after noon shall fix it no big deal hey? As long as you know how to weld properly, yes. If you don't get a tradesman to do it. You don't want it cracking. Not something for the average DIY'er. I am actually quite average welding have welded the trailer to narrow it the ratils i believe it was and they lasted if they didn't id be in big trouble I'm just having doubts in me managing to plumb up intercooler piping hah |
||
| Top | |
||
| SWC |
|
||
|
barraea wrote: SWC wrote: barraea wrote: Ahhh $20 of metal tube and a after noon shall fix it no big deal hey? As long as you know how to weld properly, yes. If you don't get a tradesman to do it. You don't want it cracking. Not something for the average DIY'er. I am actually quite average welding have welded the trailer to narrow it the ratils i believe it was and they lasted if they didn't id be in big trouble I'm just having doubts in me managing to plumb up intercooler piping hah If you are an "average" welder, then consider getting a pro to do it. Not something to stuff around with. If it breaks there could be a serious end to your new ride. |
||
| Top | |
||
| barraea |
|
||
|
SWC wrote: barraea wrote: SWC wrote: barraea wrote: Ahhh $20 of metal tube and a after noon shall fix it no big deal hey? As long as you know how to weld properly, yes. If you don't get a tradesman to do it. You don't want it cracking. Not something for the average DIY'er. I am actually quite average welding have welded the trailer to narrow it the ratils i believe it was and they lasted if they didn't id be in big trouble I'm just having doubts in me managing to plumb up intercooler piping hah If you are an "average" welder, then consider getting a pro to do it. Not something to stuff around with. If it breaks there could be a serious end to your new ride. Ops I'm alright i just am not as good as you but this will be easy. . Sorry to have hijacked the thread op |
||
| Top | |
||
| SWC |
|
||
|
barraea wrote: SWC wrote: barraea wrote: SWC wrote: barraea wrote: Ahhh $20 of metal tube and a after noon shall fix it no big deal hey? As long as you know how to weld properly, yes. If you don't get a tradesman to do it. You don't want it cracking. Not something for the average DIY'er. I am actually quite average welding have welded the trailer to narrow it the ratils i believe it was and they lasted if they didn't id be in big trouble I'm just having doubts in me managing to plumb up intercooler piping hah If you are an "average" welder, then consider getting a pro to do it. Not something to stuff around with. If it breaks there could be a serious end to your new ride. Ops I'm alright i just am not as good as you but this will be easy. . Sorry to have hijacked the thread op If you are confident go ahead, don't think it is easy. You will need to brace the K Frame before cutting out the old cross bar and ensure that everthing, repeat everything is ground back to bare clean metal. I have confidence in what I weld because I have the trade papers and the skills to do it, if I wasn't sure of my skills I wouldn't attempt it, I would prep the job and get someone with the skills to do it. Remember it is part of the subframe rigidity, it breaks, you probably crash. Sorry to be blunt, but I have seen plenty of people who though things were easy and found out the hard way what happens just trying to save a couple of dollars. If you go ahead with it yourself and need advice, please ask, myself and others will try and help. |
||
| Top | |
||
| jumpingjak |
|
||
|
hahaha post up all you want man.. I just did the photo bucket thing. all my pics i took are in there now what do i do so you guys can see them
|
||
| Top | |
||
| jumpingjak |
|
||
|
Hopefuly these links take you to my pics guys
http://s1104.photobucket.com/user/jleig ... sort=3&o=0 http://s1104.photobucket.com/user/jleig ... sort=3&o=1 http://s1104.photobucket.com/user/jleig ... sort=3&o=2 http://s1104.photobucket.com/user/jleig ... sort=3&o=3 http://s1104.photobucket.com/user/jleig ... sort=3&o=4 http://s1104.photobucket.com/user/jleig ... sort=3&o=5 http://s1104.photobucket.com/user/jleig ... sort=3&o=6 http://s1104.photobucket.com/user/jleig ... sort=3&o=7 http://s1104.photobucket.com/user/jleig ... sort=3&o=8 http://s1104.photobucket.com/user/jleig ... sort=3&o=9 |
||
| Top | |
||
| Mad2 |
|
|||
|
jumpingjak wrote: hahaha post up all you want man.. I just did the photo bucket thing. all my pics i took are in there now what do i do so you guys can see them till you get use to it .... go to the pic you want to put up here. when the pic comes up there is a "share the pic" box on the right. click on the box that says "IMG" [no need to right click], go back to what you were doing on ya mod page & paste the link that was copied. you 'may' need to 'shrink' pics coz if they are too big people won't be able to see the full pic when looking at page [they can be 'shrunk' on photobucket page] hope that helps ya |
|||
| Top | |
|||
| jumpingjak |
|
||
|
i did what you told me and this is what can up. hope it gives you the pic.
Did them other links take you to my pics? 
|
||
| Top | |
||
| Mad2 |
|
|||
|
links worked fine. single pic was a little large tho. my BA is a bit more knocked around than yours
 
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Wed May 25, 2022 9:48 am, edited 1 time in total. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
hmmmm ... thought i'd shrunk mine enuf
 ahhhh well....... .... try again .. dunno why pic up there in previous reply tho??
|
|||
| Top | |
|||
| jumpingjak |
|
||
|
wowa my beast eb pic came up in here hahaha. nice, i thort it was going to just be a link hahaha. how did you shrink your pic so small man
|
||
| Top | |
||
| Mad2 |
|
|||
|
when you are looking at the pic, there is a little row of icons above pic [to right]. click on the paintbrush & go from there. my pic still looks a bit too large for my liking ie cannot see full pic
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |
