Fordmods Logo

xr6 engine conversion into my eb. 

 

Page 31 of 42 [ 626 posts ] Go to page Previous  1 ... 28, 29, 30, 31, 32, 33, 34 ... 42  Next

 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 2:46 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

got my engine in and everything but the aircon lines hooked up. It stared but stalled like 30secons later then i realised i fogot to hook up the bf fuel relay wire to the eb one so im doing that today. hopfully later on today it will run with out stalling.
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 4:41 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

hmmm i hooked up all the wires need to run the engine but it keeps stalling after about 20sec. I think there is sumthing wrong with my fuel pump. When i turn the reds on you here the fuel pump kick in and the pressure build up then i think the car just runs of that built up fuel then stalls.
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:37 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
here is my pcm bracket cut down welded and grinded flat
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:39 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
all painted up :D
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:40 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3967

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:40 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
I used my demel tool and cutting disc to cut this out the gearbox tunnel
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:42 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
gear shifter is in :D
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:44 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
foot pedel in just at the right angel for my left foot :D
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:46 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

I can get it to run for about 20sec then it stalls.. I spent most of the day trying to figure it out but not yet. I got the reverse light working and it will only start in park an nuteral so i got that hooked up ok aswell.
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:48 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
engine is up in the air :D It was abit hard getting the box over the front of the car but got it done :mrgreen:
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:52 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
after i got the engine alittle higher i put a bord on the front of the car and let the back of the gear box sit on it then moved the jack and chair pushed the car forwards and the gearbox went straight into the engine bay :mrgreen:
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:54 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
had to take off the crank pully wheel so the front of the engine would go down.
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sat Aug 20, 2016 11:57 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

Image
on the engine mounts :mrgreen: .. Had to pull it half way back out to hook up the heater hoses dammit took me a few hours to do that and sit it back on the mounts
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sun Aug 21, 2016 12:12 am 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

I started it yesterday for about 10sec then shut it down to hook up the radiator.. Today i hooked up the last radiator hose and made sure all my wires were good and bolts tight every thing is allgood :D went to start it and it runs for about 20sec then stalls. is the fuel pump spose to run all the time or is it spose to cut in and out? I unpluged the fuel pump went and turned the reds on, went back and pluged up the fuel pump and it did nothing. its like the fuel pump only works for the time the reds go on then it seems to shut off till i turn it off and turn the reds back on. same thing when i start it, reds on fuel pump works then shuts off about 5sec later, the car starts then stalls about 20sec later and will not start again till i turn the car off and turn the reds on again.
Top
 Profile  
 
 
 Post subject: Re: xr6 engine conversion into my eb.
Posted: Sun Aug 21, 2016 11:00 am 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

well shyt go... got up this morning and went out to the car and i got a flat battery :( I aslo think i need a tacho input or sumthing to make the fuel pump run when the car starts. Afew things i have read recon the fuel pump runs for the 1st few seconds to prime the line then it shuts off and waits for a tacho input be4 it runs again. For today i will just give the fuel pump its own power so i can run the car.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 31 of 42  [ 626 posts ]  Go to page Previous  1 ... 28, 29, 30, 31, 32, 33, 34 ... 42  Next

Who is online

Users browsing this forum: No registered users and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 7:34 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names