Got everything together for my manual conversion, but i need bolts (or bolt sizes would help)

I have a gearbox, flywheel, bellhousing sandwich plate thing, basically everything i need for under the car but I do not have a single bolt

so if anyone is wrecking a 5spd car (EB on i imagine) or whatever, could i have all the bolts from it please?

Cheers

you could buy them from ford... i had to buy the bolts that hold the clutch onto the flywheel the other day.. they are $3 each from ford if that helps

Every bolt that is used to hold that auto in will be OK for the manual.

You might want to get new flywheel bolts as a precaution. There are 2 types, one short, one longer. And you cant tell until you take the flywheel off. So get 6 of the longer ones from Ford, and you'll be right.

you'll need flywheel and clutch cover bolts.

for the flywheel one you basicly want the length of the flew plate one plus the thickness of the flywheel added on... go to a bolt shop. we have boltmarsters here. not sure what where you are.

clutch cover if you want try ford but work out what thread and get ones you know will be to long then cut them down.