|
| huggiebear |
|
|||
|
hey all im rebuilding part of my motor, i removed the head to find the chain guide snapped, i then removed the one from my 4.0 and that one was also snapped so im in desperate need of one so i can put it all back togather.
its the passinger side one which bolts to the head. also the bolt if possible??? 
located here 
|
|||
| Top | |
|||
| Walker |
|
|||
|
I've put them back on broken, they can't go anywhere.
The very first EA head i done in the early 90's ended up snapped, but it was still there when i removed the head, the guy who owned the car came over and the phone rang so i went inside, i came out and he was gone, then i seen the thing snapped off. No f**k way i was doing that job for free so i slipped it into the chain and bolted it back on, it never gave him a problem, and i know plenty of others who've done the same. If it's a good engine then go buy a new timing kit, if you're not fussed then chuck it back on. |
|||
| Top | |
|||
| huggiebear |
|
|||
|
well it leaks from the rear main seal i think (unless it was the head gasket - going by the old owner) so i think ill chuck the old one back in, and still hunt down another one for the 4.0 im rebuilding as its going to be high performance so it needs everything in good nick.
cheers for the reply |
|||
| Top | |
|||
| Walker |
|
|||
|
Buy a whole kit for the engine you're building mate, you get new chain, guides, tensioner etc in the kit.
|
|||
| Top | |
|||
| martyel |
|
||
|
you can get a new kit for the timimng chain guide from repco its about $30 dollars, just tell them which part you want
|
||
| Top | |
||
| huggiebear |
|
|||
|
i was going to swap the one i have with the one pictured as its only broken at the bottom. but i cant budge the old one out at all so im leaving the broken one in as this motor will only be used till the turbo motor is built
|
|||
| Top | |
|||
| joolz |
|
|||
|
Thsi place in Melbourne i found on ebay does the entire kit including chain for $89.00. I got front Timken wheel bearings for my EL including seals the other day for $35.00 almost half the price of Fraud!
http://cgi.ebay.com.au/FORD-FALCON-EA-E ... otohosting |
|||
| Top | |
|||
| huggiebear |
|
|||
|
cheers. i emailed the guy about postage. ill ring repco next week on my day off to get their price. i did pickup head bolts today from repco tho
|
|||
| Top | |
|||
| Leroy |
|
||
|
Ford arent that dear for your guides. You will be suprised, specially if your nice to the parts guy
_________________ Now driving a Hilux |
||
| Top | |
||
| huggiebear |
|
|||
|
well i got a reply. its $10 when put in a post bag and sent straight away as i said i was urgent but i forgot i was buying a video card so it has to wait a week
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
