|
| northerlythechamp |
|
||
|
Just seeing if anyone has a cam for sale.
pm me what you have and a price, i am interested in camtech/wade/cms, must not be a crazy cam will be going into a stock xr motor so a camtech stage 1/2 or a 16xx wade cam or similar would be nice. cheers btw postage should only be 10-20$ oz-wide so NSW no biggie |
||
| Top | |
||
| TROYMAN |
|
||
|
i would say go with a wade cam.!.
there prices are good for there re-grinds.. |
||
| Top | |
||
| Waggen |
|
|||
|
add $60 for shims to regrinds thou..
|
|||
| Top | |
|||
| northerlythechamp |
|
||
|
i am kind of iffy on wade with them being in melbourne and me in sydney, can't talk face to face to make sure everything is sweet for me.
having said that wade cams need shims i know, do they also require a vernier gear? i know that camtech go straight in no shims or vernier gear needed.. and CMS does a in/out job for $550. if wade doesn't need a vernier gear i may just order one thanks |
||
| Top | |
||
| TROYMAN |
|
||
|
i beleive wade cams are ground to be put straight in.? but do require extra shims..
but most people fit a vernier gear so they can dial in a better power band. contact wade cams they will tell you what you need.. there are a lot of guys on here that have ordered cams from wade and received them with no issues. afaik cms cams require a vernea gear to have it dialed right..and also require extra shims.. |
||
| Top | |
||
| northerlythechamp |
|
||
|
thanks troyman, started a thread in 6cyl for opinions and discussion will keep this open for those interested in parting with their cam
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
