hiya guys i'm looking for a type A unichip anyone out there that has a spare

read this thread

http://www.fordmods.com/forums/viewtopic.php?t=18623

"hi

guys this is not a sales pitch , but most of these so called unchip and chiptorques add on piggyback boxes are very limited to what they can do

most of them 99% just foul the standard ECU in ur car

there not properly adjusting ur air/fuel and ignition load pionts

ur tied up to there franchise meaning u do not get the software nor hardware so u can carry on further tuning where u want when u want u always have to go back to them and pay through the nose

the amount u pay for some of these gizmoes , ur better of investing ur dollars in any good aftermarket programmable computer system , where u pay a little more and get the software and or handcontroller and ur r able to tune ( depending on ur skills ) ur car when ever a mods is done and ur not tied up to there francise

cheers ( could waffle on more but im sure the admins wouldnt be happy )

have fun "

ok how much do the wolf 3d's cost

by the time you buy it, get it installed, tuned etc, over $2k

yes fully programable ones are great, but a lot of people can't justify the price, nor have the mods or skills to run one. plus you need a laptop as well!

i have a group buy happening again have a look at this link

http://www.fordmods.com/forums/viewtopi ... 201#335201

have a look in there

there are four types of kits

installers kit 1 ............. wolf 3D version 4
installers kit 2 ............. wolf 3D version 4 PLUS

full kit 3 ..................... wolf 3D version 4
full kit 4 ..................... wolf 3D version 4 PLUS


Installers kit includes - ECU, intallation manual , window sticker , PC software kit , Full V4 harness & plug kit , warranty card , V4 mounting brackets.



Full Kit includes - ECU , installation manual , Window sticker , PC software kit , Full V4 Harness & plug kit , Warranty card , Air temp semsor , Water temp sensor , V4 mounting bracket , V4 hand controller , User guide

Version 4 PLUS as more features - the Wolf 3D version 4PLUS has stepper motor control , 2 more auxillary inputs , 3 more auxiliary outputs and 2 additional ignition outputs over and above that of the wolf 3D version 4.

so in this setup u can run a coil per cylinder ideal for high boost appilication .

the wolf 3D V4PLUS has a separate 18 pin connector harnes mounted next to the regular wolf 3D V4's 36 pin connector

othe things to consider is if ur car is EF onwards and a automatic transmission requires additional work to be done on the wolf to make it work with ur automatic transmission and dash cluster features on ur car.

u have to by a different igniter also which is not supplied in the kit.

prices depends on what ur needs are starts at $1000 and can go upto $1800 to get the whole system up and running a say a EF/EL auto car onwards

if u have any other further questions just ask

cheers